Follow

Solution: Clearomizer stopped Working.

Clearomizer can stop working for many reasons, this article will cover the main reasons and possible fixes. 

Is the battery on?

  • First and foremost you should check and make sure the battery is turned on and charged.

Do other clearomizer work on the battery? 

Does this clearomizer work on other batteries?


Is the heating coil broken?

  • Next check the ohms. If using the Lavatube use the built in ohms checker and make sure the ohms are reading what they should for the clearomizer you are using. If you do not have the Lavatube, then if you have a multimeter you can use that to check the ohms of the clearomizer. You can do this by touching one lead to the threads and the other lead of the meter to the bottom plate of the threaded connection. If you get a reading that is not near what the factory ohm reads should be then the heating coil in the clearomizer is broke and you will need a new clearomizer. If it reads correctly then continue reading. 

Is the clearomizer making connection to the battery?

  • The center connection plate of the battery and clearomizer "float" and can get moved. If the plate in the battery connection does not make contact with the battery then will not complete the connection and not supply power to the clearomizer. To Fix this please check out the Adjusting your Plate article. 
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk