Follow

Solution: Inferno BC TubeTank stopped working.

Inferno BC TubeTanks can stop working for many reasons, this article will cover the main reasons and possible fixes. 

Is the battery on?

  • First and foremost you should check and make sure the battery is turned on and charged.

Do other Inferno BC TubeTanks or atomizers work on the battery? 

Does this Inferno BC TubeTank work on other batteries?


Is the heating coil broken?

  • Next check the ohms. If using the Lavatube use the built in ohms checker and make sure the ohms are reading what they should for the atomizer you are using. If you do not have the Lavatube, then if you have a multimeter you can use that to check the ohms of the atomizer. You can do this by touching one lead to the threads and the other lead of the meter to the bottom plate of the threaded connection. If you get a reading that is not near what the factory ohm reads should be then the heating coil in the Head is broken and you will need a new Inferno BC TubeTank head. If it reads correctly then continue reading. 

Replace the Inferno BC TubeTank head:

  • Follow the steps in the Replacing the Inferno BC TubeTank Head article to replace the heating coil head assembly, if that works then the coil was broken and the head you removed needs to be thrown away or recycled. 

Is the atomizer making connection to the battery?

  • The center connection plate of the battery and atomizer "float" and can get moved. If the plate in the battery connection does not make contact with the battery then will not complete the connection and not supply power to the atomizer. To Fix this please check out the Adjusting your Plate article. 
Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk