Follow

Replacing the Coil for the Tube Tank Pro.

Replacing The Tube Tank Pro Heating Coil:

The life expectancy of the Tube Tank Pro heating coil will vary depending on frequency of use. Follow these easy steps to replace your heating coil with a new one. Replacement of the heating coil should be done after the vapor production decreases, or a noticeable flavor change.


  1. Unscrew your Tube Tank Pro form your mod. 
  2. Point the Drip Tip of the Tube Tank Pro downward and unscrew the base plate from the Tank Housing. Set the Tank Housing to the side in a safe place where it will not spill any of your e-liquid that is left in the tank. 
  3. After you've disassembled your Tube Tank Pro. Remove the old TUBE TANK PRO COIL from the base, by unscrewing it.
  4. Using one of the replacement TUBE TANK PRO REPLACEMENT COIL, screw in a new one into the base.
  5. Prime the coil and refill the tank following these instructions
  6. Reassemble the Tube Tank Pro. 

Clean-up

After filling, wipe any liquid off the Tube Tank Pro and the 510 threaded connection for best care and performance.

 

***Replacement coils for the TUBE TANK PRO come in a choice of Ω ratings: 0.5 OHM KANTHAL or 0.25 OHM NICKEL. ***

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk