Follow

Replacing the coil in your CUBIS Sub-Ohm Atomizer

Replacing The CUBIS Heating Coil:

The life expectancy of the heating coil will vary depending on frequency of use. Follow these easy steps to replace your heating coil with a new one. Replacement of the heating coil should be done after the vapor production decreases, or a noticeable flavor change.

 

  1. Unscrew the Top cap from the Tank Housing. Set the Tank Housing to the side in a safe place where it will not spill any of your e-liquid that is left in the tank. 
  2. Remove the old CUBIS coil from the Top cap, by unscrewing it.
  3. Using one of the replacement CUBIS replacement coils. Prime the coil and screw it into the Top cap.
  4. Refill the tank following these instructions
  5. Reassemble the CUBIS. 

Clean-up

After filling, wipe any liquid off the CUBIS and the 510 threaded connection for best care and performance.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk