Replacing the head in your Lavatube BC TubeTank.

Replacing The Lavatube BC TubeTank Heating Coil:

The life expectancy of the heating coil will vary depending on frequency of use. Follow these easy steps to replace your heating coil with a new one. Replacement of the heating coil should be done after the vapor production decreases.

A: Unscrew

Unscrew your Lavatube BC TubeTank from your Lavatube.

B: Disassemble

Point the Drip Tip of the Lavatube BC TubeTank downward and Unscrew the base plate from the tank well. Set the Tank Well to the side in a safe place where it will not spill any of your e-liquid that is left in the tank well. 

C: Remove 

After you've disassembled your Lavatube BC TubeTank. Remove the old Ultra-Port™heating coil from the base, by unscrewing it.

D: Replace
Using one of the replacement Ultra-Port™heating coils, screw in a new one into the base. Refill the tank well and reassemble the Lavatube BC TubeTank to use. 

E: Clean-up

After filling, wipe any liquid off the Lavatube BC TubeTank connection threads for best care and performance.


***Replacement coils for the Lavatube BC TubeTank come in a choice of Ω ratings: 1.8, 2.5, 3.0 & 3.5Ω. The BC TubeTank comes ready with a 3.5Ω coil installed.***

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request


Powered by Zendesk