Replacing The eGo One Mega VT Atomizer:
The life expectancy of the heating coil will vary depending on frequency of use. Follow these easy steps to replace your heating coil with a new one. Replacement of the heating coil should be done after the vapor production decreases, or a noticeable flavor change.
- Unscrew your eGo One Mega VT Atomizer from your mod.
- Point the Drip Tip of the eGo One Mega VT Atomizer downward and unscrew the base plate from the Tank Housing. Set the Tank Housing to the side in a safe place where it will not spill any of your e-liquid that is left in the tank.
- After you've disassembled your eGo One Mega VT Atomizer. Remove the old eGo One Mega VT Atomizer coil from the base, by unscrewing it.
- Using one of the replacement eGo One Mega VT Atomizer coil heads, screw in a new one into the base.
- Prime the coil and refill the tank following these instructions.
- Reassemble the eGo One Mega VT Atomizer.
After filling, wipe any liquid off the eGo One Mega VT Atomizer and the 510 threaded connection for best care and performance.