Setting up your Kanger Subtank Mini.
Setting up your Kanger Subtank Mini is fast and easy.
It is always recommended to wash all components of any tank before first use.
- Simply unscrew the Base Plate from the Tank housing.
- Screw a new Coil Head into the Base Plate. Choosing either a replacement coil or the RBA deck (see this article for more details on the RBA deck.)
- Prime the Coil Head by applying 3-5 drops of E-liquid to the Organic Cotton inside the Coil Head.
- Take the Tank section of the Kanger Subtank Mini and with the drip tip facing down. Tilt the tank slightly to the side and begin filling the Tank. Making sure to avoiding getting any e-liquid down the center air shaft.
- Once the tank is filled, screw the Base Plate back onto the Tank.
- Let the tank sit for about a minute before use to allow all the air to work out of the Cotton filler, so all the cotton is fully saturated.
- Screw your Kanger Subtank Mini onto your device.
- Draw on the Kanger Subtank Mini lightly, without firing your device. This is to check the air flow of the draw. If the air flow seems good for your style of vaping, you are ready to vape. If it is to airy or tight, adjust the air flow ring accordingly by turning it to open or close the airflow hole.
You are now ready to enjoy your Kanger Subtank Mini.