Replacing the Aspire Triton Coil Head

Replacing The Aspire Triton Heating Coil:

The life expectancy of the heating coil in the Aspire Triton Tank will vary depending on frequency of use. Follow these easy steps to replace your heating coil with a new one. Replacement of the heating coil should be done after the vapor production decreases, or a noticeable flavor change.

  1. Unscrew your Aspire Triton form your mod. 
  2. Point the Drip Tip of the Aspire Triton downward and unscrew the base plate from the Tank Housing. Set the Tank Housing to the side in a safe place where it will not spill any of your e-liquid that is left in the tank. 
  3. After you've disassembled your Aspire Triton. Remove the old Aspire Triton coil from the base, by unscrewing it.
  4. Using one of the replacement Aspire Triton, or the RTA deck, screw in a new one into the base.
  5. Prime the coil and refill the tank following these instructions
  6. Reassemble the Aspire Triton. 


After filling, wipe any liquid off the Aspire Triton and the 510 threaded connection for best care and performance.


***Replacement coils for the Aspire Triton come in a choice of Ω ratings: 0.3 OHM KANTHAL or 0.4 OHM Kanthal. ***









Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk