Replacing The Aspire Nautilus Mini Heating Coil:
The life expectancy of the heating coil will vary depending on frequency of use. Follow these easy steps to replace your heating coil with a new one. Replacement of the heating coil should be done after the vapor production decreases, or a noticeable flavor change.
- Unscrew your Aspire Nautilus Mini from your mod.
- Point the Drip Tip of the Aspire Nautilus Mini downward and unscrew the base plate from the Tank Housing. Set the Tank Housing to the side in a safe place where it will not spill any of your e-liquid that is left in the tank.
- After you've disassembled your Aspire Nautilus Mini. Remove the old Aspire Nautilus Mini coil from the base, by unscrewing it.
- Using one of the replacement Aspire Nautilus Mini replacement coil , screw in a new one into the base.
- Prime the coil and refill the tank following these instructions.
- Reassemble the Aspire Nautilus Mini.
After filling, wipe any liquid off the Aspire Nautilus Mini and the 510 threaded connection for best care and performance.
***Replacement coils for the Aspire Nautilus Mini come in a Ω rating of:
1.6 OHM KANTHAL ***